
Get in touch with HUANA
Any information about OEM Supply Delivery contact
We usually reply your message within 3 bussiness hours.
Square end milling cutters, also known as “flat end mills”.They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel.They can be used used for plunging, grooving, side milling, face milling, and counter boring. These are the most popular milling cutters in the industry.
End mills have a zero degree helix. They are used to mill plastics, composites of epoxy and glass, and are also used for special profile milling applications. The straight flute minimizes the fraying of the edges and provides better surface finishes than helical general purpose end mills.
Carbide Rods Are Widely Used For Automobile & Motorcycle Industry, Electronic Industry, Compressor Industry, Aerospace Industry, Mould Industry And Other Machine Building Industry. HCC Can Supply Customers With Various Spec, Of Cemented Carbide Rods & Bars From Fine Grain To Ultra-Fine Grain, Which Are Suitable For Making Reamer, Screw Tap. Shank Cutter, Micro-Drill And Ect.
Carbide Rods Are Widely Used For Automobile & Motorcycle Industry, Electronic Industry, Compressor Industry, Aerospace Industry, Mould Industry And Other Machine Building Industry. HCC Can Supply Customers With Various Spec, Of Cemented Carbide Rods & Bars From Fine Grain To Ultra-Fine Grain, Which Are Suitable For Making Reamer, Screw Tap. Shank Cutter, Micro-Drill And Ect.
The technology of exchangeable tip drills may have some limitations, both in terms of its capabilities and the practical nature of the operation, in terms of the minimum and maximum sizes for acceptable tip design;
As the successor to the Alpha 4XD drills which have been established on the market for a long time now, the DC160 Advance, like its predecessor, makes deep-hole drilling possible in a single operation without pecking – and therefore boasts the advantages of XD Technology.
This is Huanatools Company, manufacturer of carbide end mills and Inserts in China. We have focused on cutting tools for over 15years, owning worldwide customers mainly from UK,France,Italy,Spain,Mexico...
pax@huanatools.com
Room 2004, Block B, Huijin Center, Renmin East Road, Zhangjiagang City, Jiangsu Province, China.
We usually reply your message within 3 bussiness hours.